Online Consultation

24h Hotline

(86)
769 8880 2320/1

Products

Biogas Compressor

ADEKOM biogas compressor, uses Italy's most advanced, mature screw air compressor’s main motor and proven by European markets mature application experience, providing the optimal solution while leading the new trend of environmental protection and energy saving.

Contact Us Customer Service < Back




ADEKOM gas screw compressor, use Italy's most advanced, mature screw air compressor’s main motor and proven by European markets mature application experience, collect the biogas to generate electricity for urban sewage treatment plants, landfill gas plants and large farms provide the optimal solution, leading the new trend of environmental protection and energy saving.


ADEKOM gas screw compressor is suitable for applications where low inlet pressure, because of the screw compressor few moving parts, less maintenance workload, high reliability, is technology further ascension for the use of biogas piston compressor.



Standard version-anti-spark and explosion proof version indoor installation


Standard version-anti-spark and explosion proof version outdoor installation  


Operating pressure:6.5 Bar(g)


One stage compression.


Block design, additional protection cover. 


Compact size, low noise and vibration levels, easy maintenance, long-term reliability


Three-phase explosion proof engine from best Chinese supplier. (Voltage:3/220 V /380V 50 HZ /60HZ;Explosion-proof class :EXdIIBT4;Protection class:IP55;Insulation class:F. )


Highly reliable airend from TMC/Rotocomp (Italy/Germany) – one of the leaders in its field of expertise.


Airend and engine are connected directly with elastic coupling from KTR (Germany). The elastic coupling guarantees vibration absorption, impact absorption and secure torque transmissions.


Cooling system (air or water cooling), heat exchanger plates are made of high quality 316L stainless steel, which guarantees high corrosion resistance and long life span
All the pipelines are seamless and made of stainless steel.


The system is equipped with biogas sensors. In case of leakage compressor stops automatically. 


Replacement of any residual biogas by nitrogen provides a maximum operating safety.

Model
K5.5(G) KA7(G) KA11(G) KB15(G) KB18(G) KB22(G) KC30(G) KC37(G) KC45(G) KD55(G) KD75(G)
Intake pressure mbar(g) 30-100
Intake temperature °C 3-40
Relative humidity % max. 100
H2S (hydrogen sulfide) ppm max 1500
Working pressure bar(g) 7
Limits
Max. working pressure Bar(g) 7
Mini. working pressure Bar(g) 5.5
Mini/max ambient temperature °C 0/40
Parameter
Volume capacity Nm3/h 45 62 92 125 160 185 255 318 390 470 680
Air flow temperature °C Air-cooled: ambient temperature +810°C
Residual oil content  mg/m3 3
Noise level dB (A) 68±3 69±3 71±3 72±3 75±3
Power supply V/ph/Hz 3/380-415/50
Motor  ExdIIBT4
Starting method Direct driven Star-Delta Starting
Nominal power kW 5.5 7.5 11 15 18.5 22 30 37 45 55 75
Nominal speed rpm 1440 1440 1460 1460 1470 1470 1470 1475 1475 2965 2965
Protection class/Insulation class IP55/F
Fan ExdIIBT4
Nominal power W 180 180 250 550 1500 2200
Nominal speed rmp 1400 1400 960
Blowing rate m3/h 1200 2750 9300 15000 23000
Connections
Suction pipe connections inch(mm) 1 1/2" 2" DN80 DN100
Discharge pipe connections inch 1/2" 3/4" 1" 1 1/2" 2"
For any other requests please contact Adekom.